Color chart

Photo Title Description Technical Data Sheet
PLANOCOLOR PREMIUM 2K Two component cement based system for creating high strength and low thickness decorative screeds with smooth finish

High strength, two-component microcement coating for floor and wall applications. Recommended for indoor and outdoor and for surfaces where high strength is required. Suitable for wet areas but not for swimming pools (use PREMIUM SP). It is applied in 2 - 3 coats, with fibreglass net incorporation on floors. The minimum total thickness is 2 - 3mm. It gives a particularly smooth texture. Available in an off-white base which is mixed with NOVACOLOR DESIGN colour pigments. Ideal for renovations since, after "sanding" the varnish and priming the surface of the old coating, we can change the colour of the surface with a single coat application without "raising" the floor. Packaging: plastic pots of 8,5kg and 17kg.

 

Download Pdf
PLANOCOLOR PREMIUM SP Two component cement based system for creating high strength and low thickness decorative coatings inside swimming pools

Two-component microcement coating with high resistance to chemical stress and at the same time suitable for swimming pools, tanks, built-in showers, bathtubs, steam baths. Certified also according to EN 1504-2 as waterproofing protection of concrete. In  wet areas, a strong cement based waterproofing membrane such as SC ELASTIC or SC 200 PENETRATE must be applied beforehand. In swimming pools is applied to a minimum total thickness of 3mm (walls & floors) with fibreglass net incorporation. Available in an off-white base which is mixed with specific NOVACOLOR DESIGN colour pigments. Packaging: plastic pots of 17kg.

 

Download Pdf
NOVACOLOR DESIGN & DESIGN Α/VPigments in liquid form

Liquid pigments mixed with the PLANOCOLOR PREMIUM 2K and SP (NOVACOLOR DESIGN), PLANOCOLOR VENETICO and ANTICO (NOVACOLOR DESIGN A/V) microcement coatings. The mixing ratio to achieve the shades of the STANDARDISED COLOUR CHART is 2 NOVACOLOR DESIGN pigments for each (15+2) kg PREMIUM. Correspondingly, 1 NOVACOLOR DESIGN A/V pigment is mixed with 5kg of PLANOCOLOR VENETICO powder or 10kg of ANTICO powder. The 250ml or 500ml mark on the recipient refers to the container rather than the amount of pigment that varies depending on the colour code number. Packaging: pots of 250ml and 500ml.

Download Pdf
PLANOCOLOR VENETICO Brilliant white versatile decorative compound, based on very fine graded sand.

Brilliant white powder, particularly fine-grained, which is mixed with pigments in liquid or powder form in order to create decorative stucco coatings. Mix is done only with water and pigment. It is applied to indoor and outdoor as well as baths and wet area walls (no total immersion). It is applied at a thickness of 1 - 2mm for each layer. It is mixed with NOVACOLOR DESIGN A/V pigments to achieve shades of the relevant colour charts. Consumption: 1,2kg/m2/mm of thickness. Packaging: plastic pots of 12kg and paper bags of 20kg.

 

 

Download Pdf
PLANOCOLOR ANTICO One component white microcement wall or ceilings coating with ‘rustic finish’

Traditional textured cement based mortar for creating decorative coatings on interior and exterior wall applications. It is mixed with NOVACOLOR DESIGN A/V pigments and water in order to obtain shades of the relevant colour charts. Consumption: 1,2 - 1,4kg/m2/mm of thickness. Packaging: paper bags of 20kg.

 

 

Download Pdf