Waterproofers and varnishes for coverings

Photo Title Description Technical Data Sheet
PLANOFINISH PU 2KW MATTwo component aliphatic polyurethane varnish in water dispertion for protection of microcement coatings, natural stones, concrete and epoxy systems providing mat finish

Aliphatic polyurethane sealer which provides a mat finish. It is applied in 2 - 3 coats undiluted on the dry surface with a time interval of 15 - 30min between the 2 coats. Its fast application makes it suitable for external areas, where falling dust and leafs may damage the seal. It doesn’t alter the final appearance or colour of the covering (MAT finish) protects natural stone coverings from water or oily dirt. Suitable for protecting coverings on external walls from graffiti stains. Consumption: 120 - 180ml/m2 for two coats depending on the absorption of the covering. Packaging: metallic pots of 1L and 4L.

Download Pdf
PROTECT 100Waterproofing protection for natural stones, mortars and concrete in internal and external areas

Silicone based water repelling agent for the waterproofing protection of natural stones, veneer bricks, renders, cement based joints between tiles and mineral surfaces. It provides good waterproofing protection while in the same time it allows to the surface to ‘breath’. It is suitable also for external areas. Consumption: 0,1 - 2,0 L/m² in two coats. Packaging: plastic pots of 1L and 5L.

Download Pdf
PROTECT 200Water and oil repellent protection for natural stones, mortars and concrete in internal and external areas

Siloxane base water and oil repelling agent for the waterproofing protection of natural stones, veneer bricks, renders, cement based joints between tiles and mineral surfaces. It provides good waterproofing protection while in the same time it allows the surface to ‘breath’. It is suitable also for external areas without creating crusts. Consumption: 0,1 - 2,0 L/m² in two coats. Packaging: plastic pots of 1L and 5L.

Download Pdf
PROTECT 300 SSolvent based waterproofing agent with high penetration capability

Solvent based waterproofing agent with high penetration capability even inside reduced absorbency coverings such as polished natural stones like marble, granite and travertine.  Suitable also for mineral surfaces like cement based decorative bricks, artificial stone or terrazzo tiles. Waterproofs without altering the final appearance of the coverings. Provides enhanced protection against oily or colored pollutants like wine and coffee.   It also facilitates the removal of graffiti and posters from external walls. Over absorbent surfaces it is applied after a primer coat of PROTECT 100. It is applied in 1 coat (non-absorbent coverings) or 2 coats (absorbent coverings) without leaving excess material which will create superficial membrane. Consumption: 2-3 L/100m² for surfaces of reduced absorbency and 5-10 L/100m² for absorbent. Packaging: plastic pots of 1L and 5L.

Download Pdf
WET PLUS SWater and oil repellent protection with wet look for natural stones and concrete in both internal and external areas

One component sealer for the protection and the color enhancing of non-polished natural stones applied in interior and exterior. It has great adhesion and surface penetration ability combined with resistance to UV radiation. Protects the surface from water and oily stains providing also a ‘wet look’ appearance to the final surface. It is spread undiluted by brush or appropriate sponge in one or two layers, depending on the type of application, taking care not to leave excess material on the treated surface. Suitable for slate, travertine, colored marble, granite, PLANOCOLOR terrazzo and micro-pebble decorative coatings. Consumption: 2-4 L/100m² depending on the type of application. Packaging: metall pots of 1L and 5L.

Download Pdf