Terrazzo and micro terrazzo coatings

  • prev
  • Page 1 of 2
  • next
Photo Title Description Technical Data Sheet
NOVACEM CREATIVE Cement based hydraulic binder for creating low thickness terrazzo coatings

Cement based hydraulic binder which is mixed with MQ (quartz), S (silica), MR (marble), LC (light & coated) and/or RC GLASS recycled glass granulates  in order to create highly resistant to wear micro-pebble coatings on horizontal or vertical surfaces. These coatings depending on the type of granulates used in the mix can be applied as final covering also inside swimming pools. They are applied in a thickness of 6mm (walls) and 10 - 20 mm (floors) depending on the grain size of the used granulates. The granulates used inside the mix reveal after 12 - 48 hours by means of an appropriate "washing" process with water, ACID CLEAN and/or antique brushes. The PLANOCOLOR CRT 052 surface retardant can be used during this process in order to facilitate the whole operation. Mixing ratio: 20 - 35% by weight of the dry mix. Color: white and grey. Packaging: paper bags of 15kg.

 

 

Download Pdf
NOVACEM CREATIVE FLOOR Cement based hydraulic binder for creating low thickness terrazzo coatings

Cement based hydraulic binder enhanced with additives that facilitate application on floors. It is mixed with MQ (quartz), S (silica), MR (marble), LC (light & coated) and/or RC GLASS recycled glass granulates in order to create highly resistant to wear micro-pebble or polished terrazzo coatings. It can also be mixed with alkaline pigments such as NOVACOLOR OXIDE. The coating is applied in a thickness of 10 - 20mm on floors depending on the grain size of the used granulates. If there is a requirement for application on vertical surfaces, the addition of  NOVACEM T thixotropic admixture is required. The PLANOCOLOR CRT 052 surface retarder can be used during the laying process, in order to create pebbled surface finish. The granulates used inside the mix reveal after 12 - 48 hours by means of appropriate washing process with water, ACID CLEAN and/or antique brushes For polished terrazzo, grinding is done with a suitable machine after 24 - 48 hours, up to the desired gloss level. Mixing ratio: 25 - 35% by weight of the dry mix. Color: white and grey. Packaging: paper sacks of 15kg.

Download Pdf
PLANOCOLOR CRT 052Surface setting retardant for cement screeds

Surface setting retardant used for creating micro-pebble decorative coatings. It is applied by spraying the fresh and levelled on NOVACEM CREATIVE or NOVACEM CREATIVE FLOOR mixed mortar with 0,5mm minimum grain size. It has violet colour in order to control the coverage and it can be applied on horizontal and vertical surfaces. After 12 - 48 hours after its application, the surface is washed with water and/or mechanical means, reveling the surface of granulates used in the mix to a depth of only 0,5 mm. PLANOCOLOR CRT 052 slows down the setting process of the mortar to a small depth (0,5mm), thus allowing for the use of particle size even 0,5 - 1,00 mm. Consumption: 200 - 300ml/m2. Colour: Violet. Packaging: plastic pots of 5L & 20L.

Download Pdf
NOVACEM TSpecial additive in powder form

Admixture in powder form which is used inside the mixture of granulates and NOVACEM CREATIVE FLOOR in order to make it suitable for application on vertical surfaces such as skirtings, walls, swimming pools. Consumption: 250gr for every 15Kg NOVACEM CREATIVE FLOOR. Packaging: plastic pots of 250gr.

 

 

Download Pdf
NOVACEM MFSpecialized binder suitable for filling holes and small cavities

Cement based mortar suitable for filling holes on terrazzo coatings during mechanical polishing process. It is used for traditional mosaics, medium thickness terrazzo coatings produced by means of NOVACEM CREATIVE and for repairing the surface of natural stones like marble. It is applied during the grinding process at an intermediate stage (after 180 - 220). Distributed in grey or white, but if necessary can be coated with inorganic pigments like NOVACOLOR OXIDE. The application is done on the washed and wiped surface of the grinded terrazzo or marble. The surface is then covered with polyethylene sheet for 12 - 24 hours followed by the grinding process till the required polishing level is obtained. For small surfaces or spot repairs it can be mixed with water and applied by means of a suitable elastic spatula. Suitable for indoor and outdoor use. Consumption: 50 - 100gr/m2. Packaging: plastic pots of 5kg and 15kg.

 

Download Pdf
NOVACEM MICRO TERRAZZOTwo component cement based mortar

Cement based system consisted of an off-white powder which is mixed with PREMIUM LATEX, water, 62 NOVACOLOR DESIGN pigments, uncoated marble (MR), quartz (MQ), silica (S), lightweight coated (LC) or recycled glass (RC GLASS) granulates, in order to create polished terrazzo coatings of small thickness (6 - 10mm) on indoor and outdoor floors. Coatings that can be obtained exceed 4,000 different combinations through one base material. The mixing ratio of NOVACEM MICRO-TERRAZZO and granulates can be (50 - 50)%, (70 - 30)% or (30 - 70)% by weight. The degree of polishing is adjusted according to the application requirements. The grouting during the grinding process is done by applying the NOVACEM MICRO TERRAZZO mix and NOVACOLOR DESIGN without granulates addition. Thanks to this standardization, it is easy to ‘match’ the binder coating colors, even colors like pink, blue or purple, and grouting material. Consumption: depending on mixing ratio 1,8 - 2,0kg/m2/mm thickness before grinding. Packaging: plastic pots of 8,5kg.

 

Download Pdf